Magnetic Stand Wireless Charger
Source this wireless charger manufacturer product for bulk needs. Features a 5000mAh battery, 10W output, and charging stand for phone versatility.
View productThis guide is written for the buyer, not the brochure: procurement managers, sourcing agents and corporate gift teams who compare quotes before they commit. Quotes rarely line up because every phone stand manufacturer describes alloy, finish and tooling in its own words, so the reference point here is the AlloyStand file — the aluminium alloy body, the non-slip silicone contact pads, the folded card-style geometry and the OEM/ODM branding route a factory-direct aluminum phone stand supplier should be able to document in writing. Use the checklist, matrix and scenario table below to turn your next RFQ into a specification instead of a wish list.
Answer these six questions in writing before you compare a single unit price. Each one shows the reply that should reassure you, the reply that should slow the order down, and the document worth requesting with the quotation.
The AlloyStand page states an aluminum alloy body with non-slip silicone pads and an elegant silver finish. Those few words carry most of the cost and quality variables, so the table separates what the product page already confirms from what still has to be pinned down in the quotation.
| Attribute | As listed on the product page | Confirm in the quote | Why it changes unit price |
|---|---|---|---|
| Body alloy | Aluminum alloy, described as high tensile strength with lightweight portability | The exact alloy and temper the price is based on | A harder or higher-grade alloy costs more in material and machining time |
| Surface finish | Elegant silver finish | Whether the finish is anodised, brushed or painted, and its stated wear resistance | Anodising adds process steps and a per-batch setup cost |
| Phone contact points | Non-slip silicone pads | Pad hardness, adhesive type, and whether pad colour is customisable | A custom pad colour adds a component with its own batch minimum |
| Folded geometry | 13 × 5.9 × 8.3 cm (5.12 × 2.32 × 3.27 in) card-style fold | Tolerance allowance, and whether a different folded size requires new tooling | New tooling is a one-off charge that shifts your break-even quantity |
| Extra function | Built-in bottle opener | Whether the opener appears on every variant and finish | Shared tooling keeps cost low; a variant-specific opener does not |
| Compatibility | Universal smartphone compatibility | The maximum device thickness and weight the stand is rated for | A wider tolerance band can force a design change and a second sample round |
Four details a supplier should be able to explain before you release a bulk order. Each one turns into a line in your RFQ.
The stand folds flat to a card-style footprint of 13 × 5.9 × 8.3 cm (5.12 × 2.32 × 3.27 in). Ask for packed carton dimensions early, because gift-box size and shipping volume are decided by this number rather than by the unfolded stand.
The page describes a premium aluminum alloy with high tensile strength and lightweight portability. Ask for the alloy grade in writing so two quotations can be compared on the same material instead of on the same word.
Silicone contact pads keep the phone from sliding. If your brand uses a signature colour, ask whether pad colour is a customisable component and what batch size that decision requires.
The built-in bottle opener and adjustable viewing angles make the stand a talking point for bar, brewery and event audiences. Confirm both functions are present on the exact finish you order.
The product page confirms OEM/ODM services with custom design and branding for bulk corporate orders. These are the six decisions to settle in writing so the sample you approve is the item that arrives on the pallet.
Confirm which branding method suits an aluminium surface, how the artwork is supplied, and whether the sample carries the final production artwork rather than a proof.
Ask whether colours beyond the listed silver finish are produced in-house or sourced, and how a colour approval round is handled.
A small component with its own batch minimum — settle it at quotation stage rather than after the logo is approved.
Request box artwork, insert fit against the folded 13 × 5.9 × 8.3 cm footprint, and confirmation of whether retail-ready packing is possible.
Ask how the product is identified in packaging and what branding appears on the item itself, so your brand story stays consistent from box to desk.
For a new shape or mechanism, ask what drawing format is required, how many sample rounds the process includes, and who signs off before tooling starts.
The same stand is bought for very different reasons. Pick the scenario that matches your campaign, read the product fact that decides it, then carry that decision straight into the RFQ.
A factory-direct quotation should let you review five stages in writing before you commit to a bulk order. If a stage is missing, ask for it before you compare prices.
Model, finish, branding method, quantity, packaging type and delivery destination — one page is enough.
MOQ per colour and per branding method, sample terms, lead time and any tooling charge should all appear.
Check finish, pad adhesion, the bottle opener function and logo placement before bulk is released.
Agree inspection points and the defect handling rule in advance, not after the cartons are sealed.
Confirm carton dimensions, gift-box fit and the shipping terms stated on the quotation.
Share your specification, quantity, branding requirement and target date. OEM/ODM projects and bulk corporate orders are quoted per project, so include the finish and packaging you are comparing.
Email: sales@wanhuitek.com · Phone: +86-18033071837
Keep adjacent product options together for a faster catalog comparison.
Source this wireless charger manufacturer product for bulk needs. Features a 5000mAh battery, 10W output, and charging stand for phone versatility.
View product
Featuring a premium acrylic finish, this portable stand serves as an efficient multi functional phone holder for bulk corporate orders from any custom tech gifts supplier.
View product
MiniStand is an ultra-compact portable phone stand manufactured from durable ABS plastic. Ideal phone stand supplier choice for branding and bulk orders.
View productThe stand combines an aluminum alloy body with non-slip silicone pads and an elegant silver finish. The folded card-style structure measures 13 cm × 5.9 cm × 8.3 cm (5.12 × 2.32 × 3.27 in), and the product page describes the alloy as offering high tensile strength with lightweight portability.
The product page lists universal compatibility with nearly all smartphone sizes and brands, with adjustable viewing angles. If you are buying for unusually thick cases, confirm the required device thickness and weight with a sample before bulk production.
Yes. The design is dual-use: it folds flat, adjusts to different viewing angles and includes a built-in bottle opener. That extra function makes it a practical choice for bar, brewery and event giveaways.
The product page confirms oem/odm services with custom design and branding for bulk corporate orders. Send your artwork, preferred finish, packaging requirements and quantity with the quote request so the approved sample matches the production run.
The product page shows no list price; pricing is quoted per project. Use the quote request route on the product page, or contact sales@wanhuitek.com / +86-18033071837 with your specification, and ask for moq, sample terms and lead time in writing.
Include the model, finish, branding method, quantity, packaging type, delivery destination and target date. Naming the folded size and the finish on the request lets the supplier quote the same configuration you are comparing.
