AuraGlow puts two things that usually take up separate space on a nightstand — a wireless charging pad and a bedside light — into one round, compact unit. There is no phone cable to hunt for at midnight, and nothing to knock over when someone reaches for a glass of water in the dark. The build supports that job rather than decorating it. A transparent housing sits over a textured, concentric top surface, the charging pad itself is a matte grey, and the whole unit stays low and level on the table. It looks modern in a guest room without looking like a piece of test equipment, which is why the same model works as a wireless charging bedside lamp for hotel rooms and suits a hotel amenity program, an office desk and a corporate gift line alike. As a wireless charging night light rather than a charger with a lamp added on, AuraGlow is one item to specify, stock and replace instead of two. For a distributor or a hotel buyer, that shows up as a shorter parts list and a simpler replenishment cycle. We build AuraGlow as a wireless charger night light manufacturer working with promotional distributors, hotel supply buyers and private-label brands, so the same unit can leave our line plain for an amenity program or carry your logo and packaging for resale and gifting.
Key Features
No connector to line up and no port to wear out — a phone just rests on the pad for Qi wireless charging — which is exactly what you want in a room used by different people every night.
One fixture instead of two — Charger and lamp share the housing and the single Type-C input, so a guest room or a desk frees up the space a separate lamp and charging pad would occupy.
Warm amber illumination — The light glows through the clear rim in a warm tone instead of a clinical white, so it reads as a bedside lamp at 2 a.m. and still looks presentable on a reception or demo counter.
Anti-slip base — Holds on glass, laminate and lacquered wood, including surfaces that are wiped down every day.
Charging Performance & Compatibility
Qi is the charging standard here, so any Qi-enabled phone works — iPhone models and Android handsets alike. Phones without built-in Qi charging need a receiver case or add-on, which is worth checking against the device list you plan to support before an order is confirmed.
Power comes in through a Type-C port, so one cable standard covers a whole property or office instead of a drawer of different leads. The unit draws its power from that connection while it sits on the nightstand or desk. If you plan to bundle a power adapter, confirm the rating with us and we will match the pairing to your configuration.
The charging surface is flat, so a phone rests level on it and stays put through the night — nothing to snap or unclip when someone reaches for the phone in the dark. Charging runs quietly and stays cool in normal use, which is the assumption behind every part of this model: a touch-control LED night light that lives plugged in for weeks rather than one that is put away after each charge.
Ambient Light Control
Tap once to switch the light on in breathing mode — a slow amber pulse that gives enough glow to find the door, a glass of water or a phone in the dark without waking anyone else in the room.
Tap again for 50% brightness — a steady low level that suits a corridor-lit guest room, a child's bedroom or the end of a working day at a desk.
Tap a third time for 100% brightness — full output for reading, changing bedding, unpacking a bag or checking under a desk.
Tap a fourth time to switch the light off. Charging continues with no glow at all, for guests who need complete darkness.
From off, the next tap returns to breathing mode, so the sequence always runs in the same order and staff never have to hunt for a setting.
This touch-control LED night light does not wait for a phone. Switch the unit on with the charging pad empty and it runs through the same four settings — breathing, 50%, 100% and off — because the touch panel and the Qi coil work as separate circuits inside the housing. Nothing has to be recognized on the pad for the lamp to respond, and the pad can stay bare all night with the unit still plugged in at the wall. Specifying for mixed guest devices One AuraGlow on a nightstand therefore serves every guest in the building: the traveller with a current iPhone, the one carrying an older handset that has no Qi charging, and the one who leaves the phone in a bag and only wants a light to read by. You do not need to hold a lamp-only variant for rooms where nobody charges overnight, and a property can order a single model across all its rooms. A corporate gift run works the same way, since recipients are never a single-device group. Through the night and between guests A guest who prefers to charge by cable on the desk still gets a working bedside light, and a phone left in a wallet case with a metal plate may not take a charge but does not affect the lamp in any way. Housekeeping can tap to full brightness while cleaning around the nightstand and set it back to breathing mode on the way out, with no device needed to test either function. On a reception or showroom counter, the unit can glow as a display piece between visitors and start charging the next phone that is set down. Charging is unchanged by any of this: the pad still takes power from the Type-C input and still charges every Qi-enabled handset placed on it. The lamp keeps its own job, whether the pad is busy or bare.
Bedside & Hotel Room Use
Hotel guest rooms — One unit per nightstand covers the two things guests reach for most, and it does it as a wireless charging bedside lamp for hotel rooms rather than a charger that has to be explained. It replaces a lamp plus the tangle of cables and adapters that usually collects beside it, and housekeeping has one lead to check instead of three.
Home bedrooms — Night feeds, midnight wake-ups and early alarms are easier when the touch-control LED night light is a tap away and the phone has charged without a cable across the floor.
Serviced apartments and B&Bs — A consistent bedside setup across units, quick for cleaning staff to reset between stays and simple to reorder as the property grows.
Office desks — A phone stays topped up through back-to-back meetings and the ambient setting gives a low task glow at the end of the day without a desk lamp taking up the space.
Reception and showroom demonstration counters — The amber glow draws attention to the fixture, and a live phone on the pad demonstrates Qi wireless charging with no member of staff involved.
Corporate gift and welcome programs — A two-function tech gift that stays on a nightstand rather than in a drawer, and one that can carry your logo and packaging.
Product Information
Parameter
Specification
Charging
Qi wireless, 15W fast charging
Light source
LED ambient light, warm amber tone
Light modes
Breathing, 50%, 100%, off
Control
Capacitive touch panel
Power input
Type-C
Safety
Over-voltage and short-circuit protection
Base
Anti-slip
Housing
Transparent body, textured concentric top
Device compatibility
Qi-enabled devices, including iPhone
Certifications
CE, FCC, RoHS
Customization
Logo printing and custom packaging
Ordering & Customization
2. Choose the customization you need: logo printing, custom packaging design, or both. Send your artwork and tell us where the logo should sit, and a proof comes back for approval before anything is produced.
Ask about a sample before committing to a full run. Your sales contact can confirm availability and terms, and a sample is the quickest way to judge the amber tone, the housing finish and the charging behaviour against your brief.
Agree the commercial details on your quote: minimum order quantity is flexible and confirmed per item and configuration, while price, lead time and shipping are quoted against the finished specification.
Confirm your power adapter plan and packaging format at the same time — both affect the packing list and, if you bundle an adapter, the shipping weight.
Approve artwork and packaging proofs in writing. Once print and packaging are signed off, production, inspection and packing are scheduled against that approval. As a wireless charger night light manufacturer, we handle molding, assembly, printing and packing under one roof, so a single purchase order covers the whole program instead of splitting it across suppliers. Send us a message with your brief and we will come back with a specification and a quote.
Scale & Supply Capability
We are an integrated manufacturer and trading company established in 2005, with more than two decades supplying wholesalers, brand owners and distributors across North America and Europe. Our broad range of promotional and corporate gift products lets buyers consolidate different requirements with one supplier. OEM and ODM support is available for custom branding and product development, and our team coordinates production and export from first inquiry through delivery.
FAQ
Does the wireless charging night light work through a phone case?
Usually, yes — a thin everyday case will not stop a Qi charge. Metal plates, magnetic mounts and thick wallet-style cases can block it, so if your buyers or guests use those, ask us to test a sample with the cases you have in mind before the order is confirmed.
Can this wireless charging night light be used as a lamp on its own?
Yes. The light and the charging surface work independently, so the unit is still a bedside light when a guest has an older phone or simply does not want to charge overnight. The touch panel behaves the same way whether or not a device is on the pad.
How should the units be cleaned between guests or shifts?
Unplug first, then wipe the housing and the charging pad with a soft, slightly damp cloth. Keep water away from the Type-C port and skip solvent or abrasive cleaners on the transparent body; a dry microfibre cloth is enough for fingerprints on the grey pad. Never spray polish directly onto the touch panel.
Can we order this wireless charging bedside lamp for hotel rooms with custom branding?
Yes. Logo printing and custom packaging are both available, and we work from your artwork files — tell us where the logo should sit and which packaging style you want, and a proof comes back for approval. As a wireless charger night light manufacturer, we produce to the approved sample, so what you sign off is what ships.
Which mode does the light stay in once it has been set?
Whatever was tapped last — breathing, 50%, 100% or off. The unit does not step between modes by itself, so a guest who sets breathing mode at bedtime will not be woken by a lamp that has brightened while they slept. Staff can move it to any setting with a tap when a room needs more light for cleaning.
Order & Customization MOQ: Flexible Logo: Custom printing available Packaging: Custom design supported Sample: Available upon request
Certifications CE FCC RoHS
Send Us a Message
If you have any queries, get in touch today! Don't hesitate. We try to take the extra step for our customer satisfaction.